300L brewery equipment

500L Electric brewing system
06/04/2018
stainless steel brewing system
11/13/2018

For beer drinking enthusiasts who desire a great taste experience, Beer By Design provides fresh, high quality, full flavored beers designed to be enjoyed.
Unlike other micro-breweries, Zhuoda Machinery Equipment Co.,Ltd uses a uniquely refined process to craft cleaner tasting, more visually appealing ales and lagers without the use of filtering devices or additives using a state-of-the-art custom brewing process.
Beer By Design incorporates independent, traditional style brewing bringing innovation to craft beer design.
Our dedication to excellence in both product and service results in customer satisfaction and strong economic growth through beer designed to be enjoyed.
Following the Germany craft beer style, our beers use the finest two-row grains, hops and yeast.
Special mashing and kettle processes are observed.
These uniquely refined brewing techniques help create beers that are cleaner tasting and more visually appealing than most other craft beers.
This is accomplished without the use of flavor-stripping filtration devices or additives.
In addition, special fermentation procedures help to advance crisp, full-flavored ales and lagers.
Well-defined and careful deliberation of temperature control is obtained during every stage of the brewing process, insuring each beer to have peak flavor perfection.
Most importantly, we pay particular attention to our beer during the aging process.
An optimal beer-drinking pleasure is reached when our crafters allow proper aging to occur, between 14 to 30 days, depending on style.
300L brewery equipment A. 300kg per hour working capacity double roller stainless steel miller, Max working capacity 350kg per hour, make sure service brewhouse working well. Double roller can be adjust, help brewmaster milling the malt with a right size. Whole stainless frame in a humid environment is not easy to rust, power, plug type and color can be customized. B. The configuration is 500L 2 vessels steam heating brewhouse (mash&lauter tun,kettle &whirpool tun) with 2 stages 5 square meters heating exchanger to make sure finish wort cooling within 15-20 minutes. 10 liters hops filter tank for beer clearly and exchanger safety. Mash tun have two type racks agitator, boiling tun have mixer, both with frequency converter help control working speed, and be sure the temperature of saccharification process is balanced and the whirlpool is more thorough. false bottom use 0.7mm clearance wedge wire, easy for lauter and spary process. 2 pieces SUS 316 360 degree rotating CIP ball cooperate finish cleaning process. Inner surface pickling and passivation tanks, avoiding surface have hygienic dead cornor was left over bacteria. Brewhouse tanks with steam jacket on bottom and cylinder be sure hae enough heating area for tanks to short the mashing time. More than 72 hours pressure testing for steam jacket 2 bar, be sure steam leakage damage the insulation material.
With this heating jacket design can use 3 type mashing way: boil malt mashing, water heat mashing and one temperature stage mashing.
2 vessels Brewhouse have glass manhole on top with sight light, during the mashing and boiling process, no need to open the manhole lid avoid brewmaster hurt by hot steam. Steam condensation pipe collect the water to a small tank. Brewhouse tank connect use food grade stainless steel 304 piping with pipe sight glass, easy to check the lauter process effect,
Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
None of our operators are available at the moment. Please, try again later.
Our operators are busy. Please try again later
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended
Was this conversation useful? Vote this chat session.
Good Bad