Beer Brewing System

brewhouse
04/02/2019
Beer Brewing System Grain Handling & Milling
Malt Mill
4400 lbs/hr (2000 Kg/hr)
Adjustable legs
6 1/2" (165mm) diameter solid steel rolls
A single lever setting for rolls
Rolls grooved and hardened to 60 Rockwell C Roller spacing and pressure are easily adjustable
Large Capacity hopper c/w tramp metal magnet
Adjustable slide gate for controlling input
1.75" shafts to withstand pressure from cracking malt
5 HP EXPLOSION PROOF MOTOR INCLUDED
51" (130 cm) long x 28" (71 cm) wide x 51" (130 cm) high
Weighs 620 lbs (281 kg)
Price includes exit adapter
Optional 5" inclined discharge auger available
Flex auger - unloader, boot and bearing
Required to connect flex auger inlet to mill or grist case
16" rubber boot
Straight boot or 30 degree boot available Single-out unloader
Flex auger anchor bearing
Flex auger bearing assembly
350 Flex Auger to Grist Case
Drive motor and control unit is included
Body is rugged PVC Tubing for long service life
Can be customized to meet most site conditions. Grist capacity up to 3000 lbs/hr (1360 kg/hr)
Malt capacity up to 4500 lbs/hr (2041 kg/hr)
Poly Grist Case
Polyethylene hopper for malt or grist Semi transparent for level indication
Complete with frame, hopper and roof
Includes floor mount kit Gross capacity of 72 cu ft
1440 lbs of milled grist at 20 lbs/cu ft
2160 lbs of unmilled malt at 30 lbs/cu ft Standard 16" opening
Suitable for 5 - 20 bbl systems
60" diameter
109" overall height
350 Flex Auger to Grist Hydrator
Drive motor and control unit is included
Body is rugged PVC Tubing for long service life
Can be customized to meet most site conditions.
Grist capacity up to 3000 lbs/hr (1360 kg/hr) Malt capacity up to 4500 lbs/hr (2041 kg/hr)
Grist Hydrator 4" (102 mm) (C/W Thermometer)
Ureathane flex hose above valve
4" butterfly valve directly above hydrator S/S construction
T/C connection to Mash/Lauter Tun
T/C water inlet connection
Sleeve for connection to grist auger
Combines grist and water entering Mash/Lauter Tun
3" (76 mm) dual scale dial thermometer installed in 1/2" (13mm) CPLG for reading outlet temperature
5,000 lb/hr
Approximate weight = 7 LB'S (3.2 kg)
Beer Brewing System Water Systems
40 BBL Hot Liquor Tank
Design pressure: Atmospheric 4 Legs c/w adjustable Footpads.
Shell material t304 2b s/s
Cladding material t304 #4 s/s
Interior weld finish = stain removed and brightened on a regular margin and
Acid Cleaned.
Exterior weld finish = stain removed and brightened on a regular margin. Cladding penetrations are stain removed and brightened on a regular margin.
Shallow cone top, Shallow cone bottom Insulation & cladding on sides and bottom Top fittings: Atmospheric manway, CIP c/w 1" (25mm) side arm & sprayball, 1" (25mm) water inlet Side fittings: Liquid level sight tube..
Bottom fittings: 1.5" (38mm) Triclamp Drain, thermowell, 1.5" (38mm) overflow. approximately 30% Head Space.
Steam jackets designed to heat vessel full volume of water from 70F TO 180F in 12 hours
The price includes the tank placed in a mild steel cradle for shipping.
(If crating is required it will be extra).
Hot Liquor Pump
Stainless steel pump
Washdown duty motor
Includes floor mount
20 BBL Mash/Lauter Tun
Design pressure: Atmospheric,
4 of 4" (100mm) Legs c/w adjustable footpads. 3/4"(19mm) thread
Shell material t304 2b s/s, Cladding material t304 #4 s/s
Interior weld finish = stain removed and brightened on a regular margin. Exterior weld finish = stain removed and brightened on a regular margin.
Cladding penetrations are stain removed and brightened on a regular margin.
Formed top head, flat bottom, Insulation on sides.
Top fittings: Atmospheric manway, 1" (25mm) CIP, sparge piping c/w nozzles VFD Controlled top mounted motor for stirring rakes. Side fittings: Thermowell Bottom fittings: Wort outlets, Wedge-wire false bottom, 1.5"(38mm) wort collection header, spent grain removal port. Design parameters: 12 deg Plato original gravity, 95% brewhouse efficiency, 77% available extract, 180 kg/sq meter plate loading. 70" ID, 5' SIDE New flat bottom design reduces under-plate volume, reduces under-dough, and reduces the turbidity During Vorlauf and Wort Transfers. This results in a higher brewhouse efficiency and higher yields. The price includes the tank placed in a mild steel cradle for shipping. (If crating is required it will be extra). Note: Spent grain port requires 12" knife gate valve sold separately Lauter Tun Differential Pressure Sensor 2x differential pressure sensors with transmitter Readout on HMI/Brehouse control panel Measures diferential presssure above and below the grain bed Magnetic Particle Sanitary Flow Meter Magnetic flow meter Sanitary Magnetic flow meter Size: 1.5 inch (38mm), Tri-Clamp connection Integral Signal Converter Supply: 120 Vac Indication of flow and total flow 12" (300 mm) Knife Valve (Wheel) 12" (300 mm) stainless steel knife valve Lauter tun spent grain bottom manway knife valve Stainless steel wetted parts 0-ring elastomer seal Large handwheel for easy operation
20 BBL Steam Kettle / Whirlpool
Design pressure: Atmospheric
4 Legs c/w adjustable Footpads. Shell material t304 2b s/s
Cladding material t304 #4 s/s
Flat bottom cladding T304 2B s/s
Interior weld finish = stain removed,, polished to #4 on a regular margin
Exterior weld finish = stain removed and brightened on a regular margin.
Cladding penetrations are stain removed and brightened on a regular margin.
Formed conical head, shallow cone bottom.
1.5"(38mm) Mineral Wool Insulation on sides and bottom.
Steam jackets for low pressure steam.
Jackets will boil the full volume at 6% evaporation per hour.
Top fittings: 8"(204mm) vapor vent, 1"(25mm) water inlet, condensate drain
18"(458m) manway, 1"(25mm) CIP
Side fittings: whirlpool inlet, thermowell, steam jackets
Bottom fittings: drain, wort draw-off, steam jacket
Approximate Dimensions: 66"(1679mm) ID, 6'(1.8M) SIDE Stack sold separately
The price includes the tank placed in a mild steel cradle for shipping.
Kettle Boil Over Sensor
Detects over boil in the Kettle and sends signal to cut steam.
Hop Dosing Port Upgrade - Steam Kettle
System to allow for safe additions of hops to kettle while boiling
4" tri clamp hop dosing port on head of vessel
4" butterfly valve
4" ferrule
4" clamp
4" gasket
4" cap
S/S open Hopper
Work Platform
Stainless steel construction throughout
Handrails on stairs and platform
Convenient working height for brewhouse vessels
Control panel mounted on handrail
Liquor Blending Station can be mounted on the rear hand rail.
Control Panel Mounting Bracket
Stainless steel construction throughout, Glass Beaded Finish.
1.5" tube frame holds control panel and up to 3 VFD's
Frame mounts to the work platform railings using tube hangers.
40 BBL Cold Liquor Tank
Design pressure: Atmospheric
4 Legs c/w adjustable Footpads.
Shell material t304 2b s/s Cladding material t304 #4 s/s
Interior weld finish = stain removed and brightened on a regular margin and acid cleaned.
Exterior weld finish = stain removed and brightened on a regular margin.
Cladding penetrations are stain removed and brightened on a regular margin.
Shallow cone top, Shallow cone bottom
Insulation & cladding on sides and bottom.
Top fittings: Atmospheric manway, CIP c/w 1.5" (38 mm) side arm & sprayball, 1.5" (38 mm) water inlet
Side fittings: Liquid level sight tube.
Glycol Jacket to cool 130% of the volume from 65F to 34F in 12 hours using glycol at 28F.
Bottom fittings: 1.5" (38 mm) triclamp Drain, thermowell, 1.5" (38mm) overflow.
approximately 30% Head Space.
Cold Liquor Pump
Stainless steel pump
Washdown duty motor Includes floor mount
40 BBL Unitank
Vessel working pressure: 15 PSI (1 BAR) Jacket working pressure: 29 PSI (2 BAR)
Working pressures are subject to local codes
4 Legs c/w adjustable Footpads. Shell material t304 2b s/s
Cladding material t304 #4 s/s
Interior weld finish = stain removed, polished on a regular margin and acid cleaned.
Exterior weld finish = stain removed and brightened on a regular margin.
Cladding penetrations are stain removed and brightened on a regular margin.
Formed top head, 60 degree cone bottom
Insulation sides and bottom.
Top fittings: CIP c/w 1.5" side arm, spray ball, 2.5" PVRV, manway (top or side)
Side fittings: glycol couplings, thermo-well, sample port, manway (top or side)
Jackets are sized to cool the working volume from 65F to 34F in 24 hours using a glycol inlet temperature = 30F.
Bottom fittings: Drain & valve, racking ferrule & valve, glycol couplings.
Relief pressure 15 psi, Relief vacuum 1psi.
Minimum additional head space 25%
The price includes the tank placed in a mild steel cradle for shipping.
Racking arm and valve.
CIP arm end piece including gauge, ball valve, quick disconnects. PVRV valve.
40 BBL Bright Beer Tank
Vessel working pressure: 15 PSI (1 BAR) Jacket working pressure: 29 PSI (2 BAR) Working pressures are subject to local codes 4 Legs c/w adjustable Footpads.
Shell material t304 2b s/s Cladding material t304 #4 s/s
Interior weld finish = stain removed, polished on a regular margin and acid cleaned.
Exterior weld finish = stain removed and brightened on a regular margin. Cladding penetrations are stain removed and brightened on a regular margin.
Formed heads top and bottom.
Insulation on sides and bottom.
Top fittings: CIP c/w 1.5" side arm and sprayball ( top sight tube, ball valve for top pressure, pressure gauge), 2.5" PVRV manway (Top or side).
Side fittings: Glycol jackets designed to cool the tank volume from 65F to 55F in 10 hours using glycol at 28F, thermowell, sample port, carbonating ferrule and stone
Bottom fittings: 1.5" drain c/w B/F valve Relief pressure 15 psi, Relief vacuum 1psi.
The price includes the tank placed in a mild steel cradle for shipping. PVRV Valve.
Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
None of our operators are available at the moment. Please, try again later.
Our operators are busy. Please try again later
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended
Was this conversation useful? Vote this chat session.
Good Bad