brewhouse

Beer Brewing System
04/02/2019
beer laboratory equipment
04/02/2019
20 BBL Brewhouse Mash/Lauter Tun (Rakes, Underflush, )
Design pressure: Atmospheric,
4 of 4" (100mm) Legs c/w adjustable footpads. 3/4"(19mm) thread
Shell material t304 2b s/s, Cladding material t304 #4 s/s
Interior weld finish = stain removed and brightened on a regular margin. Exterior weld finish = stain removed and brightened on a regular margin.
Cladding penetrations are stain removed and brightened on a regular margin.
Formed top head, flat bottom, Insulation on sides.
Top fittings: Atmospheric manway, 1" (25mm) CIP, sparge piping c/w nozzles
VFD Controlled top mounted motor for stirring rakes.
Side fittings: Thermowell
Bottom fittings: Wort outlets, Wedge-wire false bottom, 1.5"(38mm) wort collection header, spent grain removal port.
Design parameters: 12 deg Plato original gravity, 95% brewhouse efficiency, 77% available extract, 180 kg/sq meter plate loading. 70" ID, 5' SIDE
New flat bottom design reduces under-plate volume, reduces under-dough,
and reduces the turbidity During Vorlauf and Wort Transfers. This results in a higher brewhouse efficiency and higher yields.
The price includes the tank placed in a mild steel cradle for shipping.
(If crating is required it will be extra).
Note: Spent grain port requires 12" knife gate valve sold separately
Lauter Tun Differential Pressure Sensor
2x differential pressure sensors with transmitter Readout on HMI/Brehouse control panel
Measures diferential presssure above and below the grain bed
Magnetic Particle Sanitary Flow Meter
Magnetic flow meter
Sanitary Magnetic flow meter
Size: 1.5 inch (38mm), Tri-Clamp connection Integral Signal Converter
Supply: 120 Vac
Indication of flow and total flow
12" (300 mm) Knife Valve (Wheel)
12" (300 mm) stainless steel knife valve
Lauter tun spent grain bottom manway knife valve Stainless steel wetted parts
0-ring elastomer seal
Large handwheel for easy operation
20 BBL Brewhouse Steam Kettle / Whirlpool
Design pressure: Atmospheric
4 Legs c/w adjustable Footpads. Shell material t304 2b s/s
Cladding material t304 #4 s/s
Flat bottom cladding T304 2B s/s
Interior weld finish = stain removed,, polished to #4 on a regular margin
Exterior weld finish = stain removed and brightened on a regular margin.
Cladding penetrations are stain removed and brightened on a regular margin.
Formed conical head, shallow cone bottom.
1.5"(38mm) Mineral Wool Insulation on sides and bottom.
Steam jackets for low pressure steam.
Jackets will boil the full volume at 6% evaporation per hour.
Top fittings: 8"(204mm) vapor vent, 1"(25mm) water inlet, condensate drain
18"(458m) manway, 1"(25mm) CIP
Side fittings: whirlpool inlet, thermowell, steam jackets
Bottom fittings: drain, wort draw-off, steam jacket
Approximate Dimensions: 66"(1679mm) ID, 6'(1.8M) SIDE Stack sold separately
The price includes the tank placed in a mild steel cradle for shipping.
Kettle Boil Over Sensor
Detects over boil in the Kettle and sends signal to cut steam.
Hop Dosing Port Upgrade - Steam Kettle
System to allow for safe additions of hops to kettle while boiling
4" tri clamp hop dosing port on head of vessel
4" butterfly valve
4" ferrule
4" clamp
4" gasket
4" cap
S/S open Hopper
Work Platform
Stainless steel construction throughout
Handrails on stairs and platform
Convenient working height for brewhouse vessels
Control panel mounted on handrail
Liquor Blending Station can be mounted on the rear hand rail.
Control Panel Mounting Bracket
Stainless steel construction throughout, Glass Beaded Finish.
1.5" tube frame holds control panel and up to 3 VFD's
Frame mounts to the work platform railings using tube hangers.
At Ruijia company, our brewing systems are all built turnkey and offer several advantages that outshine those of our competitors. All vessels have an impeccable heating and cooling system through our jacket design. With a high percentage of dimples and an internal spacing of 7 mm, our jackets have 130% more heating and cooling potential than tanks with the usual 3 mm gap seen in inflated jackets. All rakes in our brewhouses include an automatic outplow paddle design. This allows the brewer to plow out spent grain just by reversing the direction of the rake. Our water jet cut screens also represent our dedication to detail. Ruijia uses water jet cut screens as the standard for all of our false bottom screens to improve drainage, increase efficiency and promote consistently clear wort. Sanitation is always top priority when producing your brews. This allows our clients to inspect their system at every angle. On the areas that need to be welded, we make sure to grind smooth, polish and passivate every TIG weld. Even the largest possible stainless steel sheets are joined and butt-welded to create a stronger tank. To further ensure sanitation and quality, everything that comes in contact with your product, from the handles to the motor is 100% stainless steel and is made to be fully dismantled and easy to clean. While Criveller makes sanitation and quality a priority, we want to go even further in proving our dedication by ensuring visual satisfaction. We also offer various special features from linear piping systems to customized nameplates to make sure that every vessel represents the same attention to detail that our clients show through their product.
Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
None of our operators are available at the moment. Please, try again later.
Our operators are busy. Please try again later
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended
Was this conversation useful? Vote this chat session.
Good Bad