fermentation tank

Red copper cladding conical fermenter tank
stainless steel beer fermenter
fermenter tank

Fermentation Tank Size List
Fermentation Tank Series

Volume in US Gallon

Diameter Height
1HL Fermentation Tank

26US Gallon

620mm 1600mm
2HL Fermentation Tank

53US Gallon

820mm 1800mm
3HL Fermentation Tank

79US Gallon

960mm 1900mm
4HL Fermentation Tank

106US Gallon

960mm 2100mm
5HL Fermentation Tank

132US Gallon

1010mm 2100mm
6HL Fermentation Tank

159US Gallon

1060mm 2150mm
8HL Fermentation Tank

211US Gallon

1060mm 2550mm
10HL Fermentation Tank

264US Gallon

1210mm 2550mm
12HL Fermentation Tank

317US Gallon

1360mm 2550mm
15HL Fermentation Tank

396US Gallon

1560mm 2620mm
20HL Fermentation Tank

528US Gallon

1560mm 3100mm
25HL Fermentation Tank

660US Gallon

1560mm 3450mm
30HL Fermentation Tank

793US Gallon

1760mm 3500mm
35HL Fermentation Tank

925US Gallon

1760mm 3750mm
40HL Fermentation Tank

1057US Gallon

1760mm 4050mm
50HL Fermentation Tank

1321US Gallon

1760mm 4540mm
60HL Fermentation Tank

1585US Gallon

1960mm 4700mm
70HL Fermentation Tank

1849US Gallon

1960mm 5200mm
100HL Fermentation Tank

2642US Gallon

2250mm 5700mm
150HL Fermentation Tank

3963US Gallon

2250mm 7550mm
Fermentation tank configuration
Design pressure 45 psi (3bar); working pressure 15psi (1bar)
4 stainless steel legs with leveling footpads
Interior shell: 304 stainless steel, thickness 3mm
Exterior shell: 304 stainless steel, thickness 2mm
Interior and exterior finish bright polish to 0.6~0.8, hygiene surface 60 degree cone bottom, other angles can be specified during the design process
Combined drain extensions and beer port in cone are standard
25% headspace, unless a different volume is requested
Top manway or side manway door
Dual zone in sidewall and cone dimple cooling jacket with glycol inlet and outlet
Polyurethane insulation thickness 80mm for cooling jacket on side and bottom
Fully welded exterior shell
Non welding CIP arm and rotating 360 degree reach spray ball
Solenoid relief valve, pressure relief valve (safe valve) are standard
Pressure gauge
Temperature sensor well
Sanitary sample valve and port
All clamps and gaskets to attach all accessories
Tank complete with piping, fittings, sanitary valves and all parts.
Carbonation port is available for special request (stone not included)
Ladder hooks is available for special request
Dry hop ports and/or hop bag hooks in any fermenter of any size for special request
If you are would like to change, add, remove or modify any part of the tanks, we can accommodate that. Specific fitting sizes, changes and locations will be set during the design process after a deposit is taken.
Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
None of our operators are available at the moment. Please, try again later.
Our operators are busy. Please try again later
Have you got question? Write to us!
This chat session has ended
Was this conversation useful? Vote this chat session.
Good Bad